 |
|
|
|
- I'm Online Chat Now
Certification
Company News
Pre-Treatment in Water Systems: Sand, Carbon & Softener
Pre-Treatment System Components
A pre-treatment system is the first protection stage in a complete water purification process.
It helps remove particles, chlorine, hardness, and other impurities before water enters RO or EDI equipment.
The main components usually include sand filtration, activated carbon filtration, water softening,
dosing, piping, instruments, and automatic control. A good pre-treatment design can improve system stability,
protect downstream equipment, and reduce maintenance cost.
Pre-Treatment System Components Table
| Component | Material / Media | Function | Key Advantage | Typical Specification |
|---|---|---|---|---|
| Sand Filter | Quartz sand / Multi-layer media | Removes suspended solids, turbidity, and particles | Protects downstream equipment from clogging | Filtration accuracy: 10–50 μm |
| Activated Carbon Filter | Activated carbon (coconut shell / coal-based) | Removes chlorine, odor, organic compounds | Protects RO membrane from oxidation | Chlorine removal > 95% |
| Water Softener | Ion exchange resin (Na⁺ type) | Removes hardness (Ca²⁺, Mg²⁺) | Prevents scaling in RO and pipelines | Hardness removal > 95% |
| Dosing System (Optional) | PE tank + dosing pump | Adds chemicals such as antiscalant or disinfectant | Improves system stability and service life | Adjustable dosing rate |
| Multiport Valve / Control Valve | FRP / PVC / Stainless Steel | Controls filtration, backwash, and regeneration | Enables automatic operation | Manual / Automatic |
| Pressure Vessel / Filter Tank | FRP / Carbon steel / SS304 | Holds filtration media | Corrosion-resistant and durable | Design pressure: 0.6–1.0 MPa |
| Piping System | UPVC / SS304 / SS316L | Transfers water between units | Hygienic and leak-resistant | Customized layout |
| Flow Meter | Plastic / Stainless Steel | Monitors water flow rate | Ensures stable operation | ±5% accuracy |
| Pressure Gauge | Stainless Steel | Monitors inlet and outlet pressure | Detects blockage or fouling | 0–0.6 MPa range |
| Control Panel | PLC + HMI | Automates system operation | Reduces manual operation | Optional automation |
Engineering Note:
The correct pre-treatment configuration should be selected according to raw water quality, target water quality,
operating hours, and downstream system requirements.
The correct pre-treatment configuration should be selected according to raw water quality, target water quality,
operating hours, and downstream system requirements.
Pub Time : 2026-05-06 10:31:47
>> News list
Contact Details
Shanghai ChongYang Water Treatment Equipment CO.,LTD.
Contact Person: Ms. Yanni.Wang
Tel: 86 15900488030
Fax: 86-21-66126659
Send your inquiry directly to us